Dahua DH-PFS6428-24T - Loop-Protection TX-Time; Loop-Protection Transmit

//This command is used to enable the loop protection function.
no loop-protection
//This command is used to disable the loop protection function.
Parameter
None
Default
enable
Command Mode
Global configuration mode and interface configuration mode
Example
switch(config)# loop-protection
switch(config)# interface G1
switch(config-G1)# loop-protection
6.8.2 loop-protection tx-time
Command Description
loop-protection tx-time TIME
Parameter
Parameter
Parameters of the command mode
TIME
Unit: ms range:500-5000.
Default
500
Command Mode
Global configuration mode
Example
switch(config)# loop-protection tx-time 600
6.8.3 loop-protection transmit
Command Description
loop-protection transmit
//This command is used to enable the loop-protection transmit for a port.
no loop-protection transmit
//This command is used to disable the loop-protection transmit for a port.
Parameter
None
Default