//Save the switch configuration.
switch# write
8.4 PING test
Function Brief
Like the ping command on a common PC, the PING diagnose
function is used to test connectivity between two nodes on the network. The
difference between the ping command and PING diagnose is as follows:
The ping command executed between two common PCs is used to check
whether the physical connection between the two PCs is normal. The PING
diagnose function of the switch helps the network administrator test whether
a network device is disconnected on a LAN and locate network faults based
on the test result.
8.4.1 ping
Command Description
ping ip
//Test whether the switch and the host are reachable from each other.
Parameter
None
Default
None
Command Mode
Privileged mode
Example
//Test whether the switch and the host are reachable from each other.
switch# ping 192.168.1.100
To Previous Page
Loading...
Need help?
General