// This command is used to enter the vlan1 interface mode from the global
mode, and the exit command is used to exit the vlan1 interface mode.
1.2 System information
Function Brief
This module is used to display the device name, software version,
hardware version, MAC address, compile time, run time, and current system
time.
1.2.1 show version
Command Description
This command is used to display the version information, including
the device name, software version, hardware version, MAC address,
compile time, system run time, current version information, and
backup version information.
Parameter
None
Default
None
Command Mode
Privileged mode(To enter the privileged mode, connect a serial port,
and enter the user name and password. To exit the privileged mode, run the
exit command.)
Example
username: admin
password: admin（The password is hidden.）
switch# show version
1.2.2 show clock
Command Description
To Next Page
Loading...
Need help?
General