Dahua DH-PFS6428-24T - Dot1 x Acct-Sever; Dot1 x Timer

Command Mode
Global configuration mode
Example
switch(config)#dot1x auth-server-type local
switch(config)#dot1x auth-server-type remote
6.5.4 dot1x acct-sever
Command Description
dot1x acct-sever ip A.B.C.D secondary-ip A.B.C.D port<PORT>
shared-secret< SECRET >
//Configure the billing server IP address and the standby server IP address and
secret key.
Parameter
Parameter
Parameters of the command mode.
A.B.C.D
IP address .
secondary-ip
The standby server ip address.
Default
Remote
Command Mode
Global configuration mode
Example
switch(config)# dot1x acct-sever ip 127.0.0.2 secondary-ip 127.0.0.3 port
1812 shared-secret 123
6.5.5 dot1x timer
Command Description
dot1x timer reauth-period/quient-period value <1-65535>
//Configure authentication server update interval /hold authentication time.
Parameter
Parameter
Parameters of the command mode
value
Unit: second, range: 1-65535, aging update time
reauth-period
Authentication update interval time
quient-period
Quiet period update interval
Default
This command is to reauth-period is 3600s