Default
admin
Command Mode
Global configuration mode
Example
switch(config)#username test password test
//Add a user "test", it is the default password is testing and rights: the
guest.
switch(config)#username test password test privilege admin
//Modify user: test, password: test, permissions: admin.
switch(config)#username test password test privilege guest
//Modify user: the test management authority for the guest.
switch(config)#no username test
//Delete user test.
2.2.2 show user
Command Description
This command is used to display all the current user configurations
of the switch.
Parameter
None
Default
None
Command Mode
Privileged mode
Example
Switch#show user
2.3 Time setting
The configuration commands include:
sntp enable|disable
sntp unicast-server
sntp auto-sync timer
sntp connect
sntp timezone
local-time date
To Next Page
Loading...
Need help?
General