Parameters of the command mode
ip acl group ID,range:100-999
mac acl group ID,range:1-99
Default
None
Command Mode
Interface configuration mode
Example
switch(config-G1)# ip access-group <100-999>
6.5 802.1X config
802.1X configuration commands include:
dot1x
dot1x auth-server
dot1x auth-server-type
dot1x acct-server
dot1x timer
dot1x auth-mode authorized-force/ auto/ unauthorized-force
dot1x controlled-mode based-on-mac/ based-on-port
dot1x auth
dot1x auth-user
Function Brief
802.1x was proposed by IEEE802 LAN/WAN Standards Committee
to resolve the security issues of the WLAN. Later this protocol is used on the
Ethernet as a common access control mechanism of LAN ports. 802.1x is
mainly used to resolve the authentication and security issues on the
Ethernet. It implements authentication and control on devices connected to
ports of the LAN access devices.
6.5.1 dot1x
Command Description
Dot1x
//This command is used to globally enable the 802.1x .
no Dot1x
//This command is used to globally disable the 802.1x .
To Next Page
Loading...
Need help?
General