Dahua DH-PFS6428-24T - Show IGMP Snooping Group; IGMP Snooping Example

4.6.5 show igmp-snooping group
Command Description
show igmp-snooping group
Parameter
None
Default
None
Command Mode
Privileged mode
Example
//This command is to display multicast group information:
switch# show igmp-snooping group
VID SOURCE GROUP interFACE
----------------------------------------------- -----------------------
1 0.0.0.0 233.45.18.88 G4
1 0.0.0.0 239.255.255.250 G4 G2
1 0.0.0.0 224.0.0.252 G2 G4
4.6.6 example
Member ports requesting to join the multicast group can receive multicast
streams, but non-member ports not requesting to join the multicast group cannot
receive multicast streams.
switch# configure terminal
switch(config)# igmp snooping
switch(config)# interface G1
switch(config-G1)# igmp-snooping static-group 233.2.2.2 vlan 1
switch(config)# interface G2
switch(config-G2)# igmp-snooping static-group 233.2.2.2 vlan 1
switch(config)# interface G3