Dahua DH-PFS6428-24T - DHCP Server; IP DHCPd

switch(config-G3)# igmp-snooping static-group 233.2.2.2 vlan 1
phenomenon:
PC2/PC3 can receive video streams from the multicast source, but PC4
cannot.
4.7 DHCP server
DHCP server configuration commands include:
ip dhcpd
dhcp pool
network
default-router
dns-server
static
lease
domain-name
netbios-name-server
Function Brief
DHCP server refers to a computer that manages DHCP standards on a
specific network. It allocates a unique IP address to each workstation that logs in to
the server. DHCP server greatly simplifies network management which needs to be
manually completed before.
4.7.1 ip dhcpd
Command Description
ip dhcpd enable:
//This command is used to enable the DHCP service.
ip dhcpd disable:
//This command is used to disable the DHCP service.
Parameter
None
Default
Disable
Command Mode
Global configuration mode
Example