Dahua DH-PFS6428-24T User Manual

4.7.8 domain-name
Command Description
domain-name domain
//This command is used to configure the DNS server domain name.
Parameter
Parameter
Parameters of the command mode
domain
Domain-name,Example:www.dahua.com
Default
None
Command Mode
Address pool configuration mode
Example
switch(config)# dhcp pool 1
switch(config-dhcp)# domain-name www.dahua.com
//This command is used to configure the DNS server domain name at
www.dahua.com.
4.7.9 nbns-server
Command Description
nbns-server A.B.C.B
//This command is used to configure the secondary DNS server.
Parameter.
Parameter
Parameters of the command mode
A.B.C.D
DNS ip address
Default
None
Command Mode
Address pool configuration mode
Example
//Set the secondary DNS server address 114.114.114.114 .
switch(config)# dhcp pool 1
switch(config-dhcp)# nbns-server 114.114.114.114
4.7.10 example
This command is used to configure the switch to a DHCP server, so
that IP addresses at the client are uniformly allocated by the server.

Dahua DH-PFS6428-24T Specifications

General

Brand	Dahua
Model	DH-PFS6428-24T
Category	Switch
Language	English