switch(config)# ip-mac bind add G2 192.168.1.1 50-46-5D-E2-D5-50
6.3.2 show ip-mac bind
Command Description
//This command is used to display a IP ip-mac binding.
show ip-mac bind ip-addr
//This command is used to display the ip-mac configuration.
show ip-mac bind config
//This command is used to display the ip-mac bind.
show ip-mac bind statistics
//This command is used to display the ip-mac bind table.
show ip-mac bind table
Parameter
Default
None
Command Mode
Privileged mode
Example
//This command is used to display the ip-mac bind table.
switch(config)# show ip-mac bind table
6.4 ACL config
ACL configuration commands include:
mac acl
ip acl
rule
ip/mac access-group
Function Brief
ACLs are used to filter packets based on the configured packet matching
rules and processing operations. After an ACL is applied to a port, fields in each
packet are analyzed. After matched packets are identified, these packets are
processed according to the preset operations, such as permit, deny, rate limiting,
To Next Page
Loading...
Need help?
General