Dahua DH-PFS6428-24T - System Protection SYN-ACK; System Rate-Limit; MAC Binding

configuration.
system protection syn-ack
no system ignore icmp-echo
Parameter
None
Default
None
Command Mode
Global configuration mode
Example
//Configur defense against this device SYN TCP attack.
switch(config)# system protection syn-ack
6.1.3 system rate-limit
Command Description
system rate-limit value
no system rate-limit
//If you want to control the CPU of the received data value, you can use
this command to configure. Use the no form of the command to cancel this
configuration.
Parameter
Paramet
er
Parameters of the command mode
value
<0-100000> pps , default 0 :disable limited.
Default
None
Command Mode
Global configuration mode
Example
//Configure the CPU data receiving threshold is 1000.
switch(config)# system rate-limit 1000
//Close the CPU data receiving threshold control function.
switch(config)# no system rate-limit
6.2 MAC binding
MAC binding configuration commands include: