CAUTION
Please make sure you have storage right before use the manual reord function. Install the
format HDD on the DVR before you use this function
The record priority is: Alarm>Motion detect>Regular.
4.8.1.1 Schedule Record
System can record regularly as you specified.
On the preview interface, right click mouse and then select Manual->Record, or in the
main menu, from Setting->Storage->Record, check the box to enable schedule
function of corresponding channels. See Figure 4-92.
It displays all analog channels and connected IP channel(s).
Select one or more channel(s). Check All to select all channels.
Display current channel status. It includes auto, manual, stop,enable, disable.
: Highlighted means current state has been checked.
: means current state has not been checked.
Set the record type of the main stream, sub stream. It includes: manual, auto and
close.
Manual: It has the highest priority. No matter channel is in which mode right
now, click manual, the corresponding channel begins general record.
Auto: Automatically record video of the specified record type at the specified
period. Refer to chapter 4.1.4.7 Schedule to set schedule record type.
Close：All-channel stops record.
Select one or more channel(s)and then enable/disable snapshot function.
Figure 4-92
To Next Page
Loading...
