Figure 4-183
Step 2 Please refer to chapter 4.14.8.1 Local alarm to set parameters.
Step 3 Click Apply or Save to complete setup.
4.14.8.5 IPC Offline Alarm
Once you select this item, system can generate an alarm when the front-end IPC
disconnects with the local DVR. The alarm can activate record, PTZ, snap and etc. The
alarm can last until the IPC and the HDVR connection resumes.
Step 1 From Main menu->Setting->Event->Alarm->IPC offline.
Enter IPC offline alarm interface. See Figure 4-184.
To Next Page
Loading...
