information and upgrade network camera.
From main window->Setup->Camera->Registration, registration interface is shown as
below. See Figure 5-24.
Figure 5-24
5.7.1.1.1 Initialize Camera
It is to initialize connected remote device and change its login password and IP address.
Steps:
Step 1 From main interface->Setting->Camera->Registration.
Enter Registration interface. See Figure 5-25.
Step 2 Click IP search and check the Uninitialized box.
Device displays uninitialized camera.
Figure 5-25
Step 3 Select a camera to be initialized and then click Initialize button.
To Next Page
Loading...
