Figure 5-79
Step 2 Refer to chapter 5.7.3.1.1 motion detect for detailed parameter information.
Step 3 Click Save to complete the setup.
5.7.3.1.5 Diagnosis
System can trigger an alarm when the video stripe, noise, color cast, out of focus, over
exposure event occurred.
Step 1 From main window->Setup->Event->Video detect->Diagnosis.
Enter diagnosis interface. See Figure 5-80.
Figure 5-80
Step 2 Click Set button.
Enter diagnosis type interface. See Figure 5-81.
To Next Page
Loading...
