Dahua HCVR8204A-S3 - Page 374

364
Parameter
Function
Screen number
Please select a screen number from the dropdown list.
Resolution
 System supports the following resolutions:
1920×1080,1280×1024,1280×720,1024×768,2560×1440,3840×
2160@25fps,3840×2160@30fps.
 The default VGA/ HDMI1/HDMI2 resolution is 1280×1024.
 Please note the system needs to reboot to activate new setup.
 Right now, HDMI2 does not support 3840×2160@25fps, 3840×
2160@30fps.
Transparency
Here is for you to adjust transparency. The value ranges from 128 to 255.
Time
title/channel title
Check the box here, you can view system time and channel number on the
monitor video.
Channel display
You can select to display channel name or not when system is playback.
Original rate
Check the box here, the video can be displayed at its actual size.
IVS rule
preview
Check the box here, you can view IVS rule name on the preview window.
POS
information
Check the box here; you can view POS information on the preview window.
Note
Make sure the POS function is enabled.
Step 3 Click Save to complete the setup.
5.7.5.2.2 TV Adjust
Note
This function is for some series product only.
It is to set TV output region.
From main menu->Setup->System->Display->TV adjust. Enter TV adjust interface. See
Figure 5-136. Drag the slide bar to set and the settings become valid immediately. Click
default to restore default setup.
Figure 5-136
5.7.5.2.3 Tour