To Next Page

To Previous Page

Web Operations 215

5.4.3.2 Auto Deleting Old Files

After configuring auto deleting old files, when the Device is working, it deletes the old files that

occurred before the set schedule.

Select SETUP > SYSTEM > MAINTAIN. Step 1

The Auto Maintain interface is displayed.

In the Auto Delete Old Files area, select Customized, and then enter the days. Step 2

You can enter 1 day through 31 days.

Click Save. Step 3

5.4.3.3 Auto Booting Up

After configuring auto booting, the Device boots up automatically according to the schedule. If

you turn the vehicle key to ACC position before configuring the auto booting up schedule, the

Device boots up immediately.

Select SETUP > SYSTEM > MAINTAIN. Step 1

The Auto Maintain interface is displayed.

In the Auto Boot up area, select Valid, and then enter the specific time. Step 2

Click Save. Step 3

5.4.3.4 Auto Shutdown

After configuring auto shutdown, the Device automatically shuts down according to the ACC

power off time and auto boot up setting.

 If you have set the time auto boot up, there are two situations when the ACC is powered off:

If the system time is between the auto boots up and auto shutdown, the Device is turned off

by the configured time. If the system time is before the auto booting up or after the auto

shutdown, the Device is turned off immediately.

 If the auto booting up is not set, when the ACC is disconnected, the Device shuts down at

the scheduled time.

Select SETUP > SYSTEM > MAINTAIN. Step 1

The Auto Maintain interface is displayed.

In the Auto Shutdown System area, select Everyday, and then enter the specific Step 2

time.

Click Save. Step 3

5.4.3.5 Auto Delay for Shutdown

After configuring auto delay for shutdown, when select Never for auto shutdown system and

ACC is disconnected, the Device shuts down according to the settings of auto delay for

shutdown.

 If you enter the delay value except 0, the Device automatically shuts down according to the

delay settings.

 If you enter 0, the Device shuts down according to the auto shutdown settings without

delay.

Select SETUP > SYSTEM > MAINTAIN. Step 1

Dahua MCVR6204 User Manual

Questions and Answers: