Web Operations 188
Click Save. Step 4
5.3.3 Alarm Events Configuration
5.3.3.1 Configuring Video Detection Settings
Video detection includes motion detection, video loss, and tampering. This function detects the
abnormal changes and trigger alarms.
5.3.3.1.1 Configuring Motion Detect Settings
When the moving object appears and moves fast enough to reach the preset sensitivity value,
the system activates alarm.
Select SETUP > EVENT > DETECT > Motion Detect. Step 1
The Motion Detect interface is displayed, see Figure 5-74.
Motion Detect Figure 5-74
Select the Enable check box and the channel that you want to apply the motion detect Step 2
function.
Set motion detect region. Step 3
1) Next to Region, click Setup.
The Setup interface is message. See Figure 5-75.
To Next Page
Loading...
Need help?
General