Web Operations 216
The Auto Maintain interface is displayed.
Configure the auto delay for shutdown. Step 2
The value ranges from 0 through 65535. The fault value is 5.
Click Save. Step 3
5.4.4 Backup and Restore
You can back up or restore the web configurations and restore to default settings.
5.4.4.1 Backing up Configurations
You can back up all the configurations of web.
Select SETUP > SYSTEM > IMP/EXP. Step 1
The Import&Export interface is displayed. See Figure 5-108.
Importing and exporting configurations Figure 5-108
Click Config Export, and then select the save path. Step 2
The system starts backing up configurations.
5.4.4.2 Restoring Configurations
You can use the backed up configurations to quickly configure the Device and restore the
device configurations.
Select SETUP > SYSTEM > IMP/EXP. Step 1
The Import&Export interface is displayed. See Figure 5-109.
Importing and exporting configurations Figure 5-109
Click Browse, and then select the backup configuration file that you want to import. Step 2
Click Config Import.
Step 3
The system pops up the reboot message. Click OK, the system starts importing the
configurations and reboot the device after importing is completed.
5.4.4.3 Restoring to Default
You can restore the system to default configurations or the factory default. Only the user with
related authorities can do this operation.
To Next Page
Loading...
Need help?
General