Web Operations 143
5.1.9 Configuring Snapshot Schedule
You can configure the storage schedule for taking the snapshot.
Preparation
The Snapshot is enabled for the corresponding channel. For details, see "5.1.7 Configuring
Record Settings."
Procedure
Select SETUP > STORAGE > SCHEDULE > Snapshot. Step 1
The Snapshot interface is displayed, see Figure 5-20.
Snapshot schedule
Figure 5-20
Configuring time period for taking snapshots. Step 2
1) Click Setup.
The Setting interface is displayed. See Figure 5-21.
Setting Figure 5-21
2) Select the snapshot type and weekday, and enter the period for taking snapshot.
To Next Page
Loading...
Need help?
General