Dahua MCVR6204 - System Maintenance; Requirement for Maintenance

Web Operations 211
Position report (device auto) Figure 5-102
2) Configure the parameters. For details, see Table 5-40.
Table 5-40 Device auto report parameters description
Parameter
Description
Report Interval
When the vehicle ACC status is on, the system report the position
to platform according to the configured report interval, report
distance, and inflexion angle.
The system reports vehicle position to platform only if one of
conditions is satisfied.
Report by Distance
Inflexion Angle
Report Interval When
ACC off
When the vehicle ACC status is off, the system report the position
to platform according to the configured report interval.
 Platform schedule.
In the Report Strategy list, select Platform Schedule. The Platform Schedule
setting interface is displayed. See Figure 5-103.
The platform obtains the device position by the configured schedule. The schedule
is configured at the Platform. For details, see the manual of platform.
Position report (platform schedule) Figure 5-103
Click Save. Step 3
System Maintenance 5.4
5.4.1 Requirement for Maintenance
To keep the Device running normally, it is recommended to manage, backup, and maintain the
Device.
 Check the monitoring screen of Device regularly.
 Delete the unused user and group regularly.
 Modify the user password every three months.