Dahua MCVR6204 User Manual

Web Operations 161
Setting Figure 5-45
2) In the Type list, select Picture or Record, and select the save path.
3) Click Save.
The system starts downloading the pictures or recorded videos.
During downloading, click Stop to stop the process.
5.2.4 Configuring Alarm Events Settings
The parameters might be different depending on the model you purchased, and the actual
interface shall prevail.
5.2.4.1 Alarm Type
For the alarm types and conditions that can trigger the alarm events, see Table 5-17.
Table 5-17 Alarm type description
Alarm type
Description
Preparation
Motion
Detect
When the moving object
appears and moves fast
enough to reach the preset
sensitivity value, the system
activates the alarm.
The motion detect function is enabled. For
details, see "5.3.3.1.1 Configuring Motion
Detect Settings."
External
Alarm
The alarm is triggered by the
alarm signal that is detected
by the alarm input port on the
Device.
The local alarm function is enabled. For
details, see "5.3.3.2 Configuring Alarm Input
Settings."
Tampering
The alarm is triggered when
the camera lens is covered.
The tampering function is enabled. For
details, see "5.3.3.1.3 Configuring Tampering
Settings."
HDD Error
The alarm is triggered when
the HDD has failures or
malfunctions.
The HDD error detect function is enabled.
For details, see "5.3.3.3 Configuring System
Event Settings."
Video Loss
The alarm is triggered when
video loss occurs.
The video loss function is enabled. For
details, see "5.3.3.1.2 Configuring Video
Loss Settings."
HDD Full
The alarm is triggered when
the free space is less than the
set value.
The HDD No Space function is enabled. For
details, see "5.3.3.3 Configuring System
Event Settings."

Dahua MCVR6204 Specifications

General

Brand	Dahua
Model	MCVR6204
Category	DVR
Language	English