Dahua MCVR6204 User Manual

Web Operations 191
Video Loss Figure 5-76
Select the Enable check box and the channel that you want to apply the video loss Step 2
detect function.
Configure the parameters. For details, see Table 5-29. Step 3
Click Save. Step 4
5.3.3.1.3 Configuring Tampering Settings
When the camera lens is covered, or the video is displayed in a single color because of the
causes such as sunlight status, the monitoring cannot be continued normally, and in this case,
the system activates alarm and links the configured actions.
Select SETUP > EVENT > DETECT > Tampering. Step 1
The Tampering interface is displayed, see Figure 5-77.
Tampering Figure 5-77
Select the Enable check box and the channel that you want to apply the tampering Step 2
detect function.
Configure the parameters. For details, see Table 5-29. Step 3
Click Save. Step 4

Dahua MCVR6204 Specifications

General

Brand	Dahua
Model	MCVR6204
Category	DVR
Language	English