Local Configurations 80
The green line represents data sending speed, and the red line represents data
receiving speed.
4.3.3 Configuring Vehicle Settings
You can configure the vehicle settings such as auto register, speed, gyro, and position report.
4.3.3.1 Configuring MAC Acquisition
4.3.3.1.1 Configuring MAC Acquisition Parameters
After MAC acquisition function is enabled, the system automatically collects the MAC
addresses of nearby devices. When the Device is accessed to the Platform, the system reports
the MAC information to the Platform by the configured interval.
Select Main Menu > VEHICLE > WIFI. Step 1
The WIFI interface is displayed.
In the Function Type list, select Mac. Step 2
The Mac setting interface is displayed. See Figure 4-64.
Mac setting Figure 4-64
In the Upload Interval box, enter the interval. Step 3
Configure this parameter when the Device is accessed to Platform.
Click Setup. Step 4
4.3.3.1.2 Viewing MAC Information
After the MAC information has been collected, you can view, search, back up, and delete MAC
information.
Select Main Menu > ADVANCED > Mac Info. Step 1
The Mac Info interface is displayed.
To Next Page
Loading...
Need help?
General