Local Configurations 55
Previous Frame/Next Frame.
When the playback is paused, click or click to play back
single frame record.
When playing back single-frame recorded video, click or to
Slow Playback.
During playing back, click this button to set the speed of slow playback,
such as Slow×1/2, Slow×1/4. During fast playback, click this button to
slow down the speed of fast playback.
Fast Playback.
During playing back, click this button to set the speed of fast playback, such
as FastX2, FastX4. During slow playback, click this button to speed up slow
playback.
In the full screen mode, click this button to take a snapshot and save into
the USB storage device or mobile HDD.
Adjust volume of playback.
4.2.3.2 Playing Back Recorded Video
You can play back recorded video by time or file list.
During playing back, you can zoom in an area of image to view the details. To zoom in an area
of image, do either of the following:
Hold down the left mouse button to select the area that you want to enlarge. The area is
enlarged after the left mouse button is released. Right-click on the screen to exit zoomed in
status.
Point to the center of the area that you want to enlarge, move the wheel button to zoom in
the area.
After entering the zoomed in status, you can drag the enlarged area to move to any directions
to view details of other parts of image. Right-click on the enlarged image to return to the original
status.
4.2.3.2.1 Playing Back Recorded Video by Time
In the search type list, select REC, and then select where you want to search the Step 1
recorded videos.
The search sources include From R/W HDD and redundancy HDD. The redundancy
HDD is supported only when there is a redundancy HDD on the Device. The
redundancy HDD is supported only when there is a redundancy HDD on the Device.
For details about redundancy HDD operations, see "4.3.7.1 Configuring HDD
Information."
From R/W HDD: Play back recorded videos from local HDD of the Device.
From redundancy HDD: Play back recorded videos from redundancy HDD of the
Device if it is supported. For details about configuring recording schedule of
redundancy HDD operations, see "4.1.8 Configuring Recording Schedule."