Danfoss VACON OPTEA User Manual

•
•
•
•
•
•
•
•
•
•
•
•
•
12.2.100 Fault Code 46 - Safety Request, S11 - SSM
Cause
This warning is an indication that a safety function is active on the AC drive.
Troubleshooting
As a default, faults with the code 46 or 47 are not saved into the fault history of the AC drive. The drive application can change
the logging mode so that these faults are saved in the fault history. The Activity log can be used to see the activation and deacti-
vation history of the safety functions.
12.2.101 Fault Code 46 - Safety Request, S12 - SMS
Cause
This warning is an indication that a safety function is active on the AC drive.
Troubleshooting
As a default, faults with the code 46 or 47 are not saved into the fault history of the AC drive. The drive application can change
the logging mode so that these faults are saved in the fault history. The Activity log can be used to see the activation and deacti-
vation history of the safety functions.
12.2.102 Fault Code 47 - Safety Reached, S1 - STO
Cause
This warning is an indication that a safety function is in the Reached state.
Troubleshooting
For the safe stopping functions, the possible controlled stop has been executed and the STO(+SBC) or the SOS function is ac-
tive.
As a default, faults with the code 46 or 47 are not saved into the fault history of the AC drive. The drive application can change
the logging mode so that these faults are saved in the fault history. The Activity log can be used to see the activation and deacti-
vation history of the safety functions.
12.2.103 Fault Code 47 - Safety Reached, S2 - SS1
Cause
This warning is an indication that a safety function is in the Reached state.
Troubleshooting
For the safe stopping functions, the possible controlled stop has been executed and the STO(+SBC) or the SOS function is ac-
tive.
As a default, faults with the code 46 or 47 are not saved into the fault history of the AC drive. The drive application can change
the logging mode so that these faults are saved in the fault history. The Activity log can be used to see the activation and deacti-
vation history of the safety functions.
12.2.104 Fault Code 47 - Safety Reached, S3 - SS2
Cause
This warning is an indication that a safety function is in the Reached state.
Troubleshooting
For the safe stopping functions, the possible controlled stop has been executed and the STO(+SBC) or the SOS function is ac-
tive.
As a default, faults with the code 46 or 47 are not saved into the fault history of the AC drive. The drive application can change
the logging mode so that these faults are saved in the fault history. The Activity log can be used to see the activation and deacti-
vation history of the safety functions.
AQ319736045637en-000101 / DPD01798 | 167Danfoss A/S © 2021.06
Fault Tracing
VACON® NXP Advanced Safety Options
Operating Guide

Danfoss VACON OPTEA Specifications

General

Brand	Danfoss
Model	VACON OPTEA
Category	DC Drives
Language	English