Symbologies Enter/Exit Programming Mode
Product Reference Guide
129
GS1 DataBar Expanded Set Length 1
This feature specifies one of the bar code lengths for GS1 DataBar Expanded
Length Control on page 128. Length 1 is the minimum label length if in Variable
Length on page 128 Mode, or the first fixed length if in Fixed Length on page
128 Mode. Length includes the bar code’s data characters only.
The length can be set from 1 to 74 characters. See "Set Length 1" on page 304
for more detailed programming instructions.
$CXBL1
Select GS1 DataBar Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
01 = Length 1 is 1 Character
To Next Page
Loading...
Need help?
General
