Datalogic QuickScan I QBT21X1 User Manual

Enter/Exit Programming Mode Standard 2 of 5
204 QuickScan™ I QM21X1 / QBT21X1
Standard 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for Standard 2 of 5 Length
Control on page 203. Length 1 is the minimum label length if in Variable Length
on page 203 Mode, or the first fixed length if in Fixed Length on page 203
Mode. Length includes the bar code’s check and data characters.
The length can be set from 1 to 50 characters. See "Set Length 1" on page 304
for more detailed programming instructions.
$CS2L1
Select Standard 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
08 = Length 1 is 8 Characters

Datalogic QuickScan I QBT21X1 Specifications

General

Brand	Datalogic
Model	QuickScan I QBT21X1
Category	Barcode Reader
Language	English