To Next Page

To Previous Page

Enter/Exit Programming Mode

Product Reference Guide

269

BT Pin Code

After enabling Security Mode (see "BT Security Mode" on page 268), specify

whether you want to set a 4-digit or a 16-digit PIN Code. See page 308 for

detailed information and examples for setting this feature.

Select PIN Code Length

Set PIN Code

Determine the desired characters for the PIN code, then convert to hexadecimal

using the ASCII Chart on the inside back cover of this manual. See page 308 for

detailed information and examples for setting this feature.

Select 4-character BT PIN Code

Select 16-character BT PIN Code

DEFAULT

Set 4-character BT Pin Code

To configure this feature, scan the ENTER/EXIT PRO-

GRAMMING MODE bar code above, then the desired bar

code , followed by the digits from the Alphanumeric char-

acters in Appendix D. Keypad representing your desired

character(s). End by scanning the ENTER/EXIT bar code

again.

Set 16-character BT PIN Code

CANCEL

Make a mistake? Scan the CANCEL barcode to abort and

not save the entry string. You can then start again at the

beginning.

DEFAULT

31323334 = Default PIN Code is 1234

Datalogic QuickScan I QBT21X1 User Manual

Questions and Answers: