Datalogic QuickScan I QBT21X1 - Rf Batch Mode Transmit Delay

Enter/Exit Programming Mode
264 QuickScan™ I QM21X1 / QBT21X1
RF Batch Mode Transmit Delay
Specifies the delay in 10 msec increments between transmitting labels stored in
batch memory.
RF Batch Mode Transmit Delay = No Delay
RF Batch Mode Transmit Delay = 50 mS
RF Batch Mode Transmit Delay = 100 mS
RF Batch Mode Transmit Delay = 0.5 seconds
RF Batch Mode Transmit Delay = 1 second
RF Batch Mode Transmit Delay = 2.5 seconds
DEFAULT