Datalogic QuickScan I QBT21X1 User Manual

Enter/Exit Programming Mode Codablock F
234 QuickScan™ I QM21X1 / QBT21X1
Codablock F Set Length 2
This feature specifies one of the bar code lengths for Codablock F Length Con-
trol on page 232. Length 2 is the maximum label length if in Variable Length on
page 232 Mode, or the second fixed length if in Fixed Length on page 232
Mode. Length includes the bar code’s check, data, and full-ASCII shift charac-
ters. The length does not include start/stop characters.
The length can be set from 3 to 255 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See "Set Length 2" on page 305 for
more detailed programming instructions.
$CCFL2
Select Codablock F Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
100 = Length 2 is 100 Characters

Datalogic QuickScan I QBT21X1 Specifications

General

Brand	Datalogic
Model	QuickScan I QBT21X1
Category	Barcode Reader
Language	English