Symbologies Enter/Exit Programming Mode
Product Reference Guide
203
Standard 2 of 5 Decoding Level
Standard 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decoding
for the Standard 2 of 5 symbology.
Variable Length:
For variable length decoding, a minimum and maximum length
may be set.
Fixed Length:
For fixed length decoding, two different lengths may be set.
NOTE
The Standard 2 of 5 Decoding Level feature is set using
"I 2 of 5
Decoding Level"
on page 162.
$CS2LC00
Standard 2 of 5 Length Control = Variable Length
$CS2LC01
Standard 2 of 5 Length Control = Fixed Length
DEFAULT
To Next Page
Loading...
