RS-232/USB-COM Interfaces Enter/Exit Programming Mode
Product Reference Guide
33
Beep On ASCII BEL
When this parameter is enabled, the reader issues a beep when a <BEL> char-
acter is detected on the RS-232 serial line. <BEL> is issued to gain a user's
attention to an illegal entry or other important event.
Beep On Not on File
This option enables/disables the action of the reader to sound a three beep
sequence upon receiving a Not-On-File (NOF) host command.
$CR2BB00
Beep On ASCII BEL = Disable
$CR2BB01
Beep On ASCII BEL = Enable
DEFAULT
$CBPNF00
Beep On Not On File = Disable
$CBPNF01
Beep On Not On File = Enable
To Next Page
Loading...
Need help?
General
