Enter/Exit Programming Mode Code 128
156 QuickScan™ I QM21X1 / QBT21X1
Code 128 Set Length 2
This feature specifies one of the bar code lengths for Code 128 Length Control
on page 154. Length 2 is the maximum label length if in Variable Length on
page 154 Mode, or the second fixed length if in Fixed Length on page 154
Mode. Length includes the bar code’s data characters only.
The length can be set from 1 to 80 characters. A setting of 00 specifies to
ignore this length (only one fixed length). See "Set Length 2" on page 305 for
more detailed programming instructions.
$CC8L2
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
80 = Length 2 is 80 Characters
To Next Page
Loading...
