omconfig: Managing Components Using the Instrumentation Service 65
config=serial
(continued)
mode=directbasic | directterminal |
directbasicterminal | modembasic |
modemterminal | modembasicterminal
directbasic: Type of messaging used for IPMI
messaging over a serial connection.
directterminal: Type of messaging that uses
printable ASCII characters and allows a limited
number of text commands over a serial
connection.
directbasicterminal: Both basic and terminal
mode messaging over a serial connection.
modembasic: Type of messaging used for IPMI
messaging over a modem.
modemterminal: Type of messaging that uses
printable ASCII characters and that allows a
limited number of text commands over a
modem.
modembasicterminal: Both basic and terminal
messaging over a modem.
NOTE: Not all commands may be supported on
the system.
privilegelevel=administrator | operator
| user
administrator: Sets the maximum privilege
level that can be accepted on a serial
connection, to Administrator.
operator: Sets the maximum privilege level that
can be accepted on a serial connection, to
Operator.
user: Sets the maximum privilege level that can
be accepted on a serial connection, to User.
Table 4-3. omconfig chassis bmc (continued)
name=value pair 1
config=
name=value pair 2 Description
To Next Page
Loading...