Dell Command Line Interface User Manual

omconfig: Managing Components Using the Instrumentation Service 69
config=user
(continued)
id=user id
dracusergroup=admin | poweruser |
guest | testalert | custom | none
id=user id: User ID of the user being
configured.
NOTE: Only RAC groups can be configured. The
option dracusergroup is available only if DRAC 5
is present on the system.
dracusergroup=admin: Enables the
Administrator User privileges.
dracusergroup=poweruser: Enables the Power
User privileges.
dracusergroup=guest: Enables the Guest User
privileges.
dracusergroup=testalert: Enables the Test
Alert User privileges.
dracusergroup=custom: Enables the Custom
User privileges.
NOTE: See Table 4-4 for more information on the
name=value pair. dracusergroup=custom.
dracusergroup=none: Does not enable User
privileges.
id=number lanaccesslevel=
administrator | operator | user| none
id=number: ID number of the user being
configured.
lanaccesslevel=administrator: User with an ID
has access privileges of an Administrator for the
LAN channel.
lanaccesslevel=operator: User with an ID has
access privileges of an Operator for the LAN
channel.
lanaccesslevel=user: User with an ID has access
privileges of a User for the LAN channel.
lanaccesslevel=none: User with an ID does not
have access privileges for the LAN channel.
Table 4-3. omconfig chassis bmc (continued)
name=value pair 1
config=
name=value pair 2 Description

Dell Command Line Interface Specifications

General

Brand	Dell
Model	Command Line Interface
Category	Network Card
Language	English