1 Locating the Express Service Code and Service tag.......................................................................................12
2 Locating the Mini Express Service Tag...............................................................................................................13
3 Adjusting the lift arm bar to just under 17 inches............................................................................................. 15
4 Reconfiguring the portable lift with the Voyager conversion kit..................................................................16
5 Sliding rail assembly - 2U systems....................................................................................................................... 18
6 CMA arm and separator..........................................................................................................................................19
7 Installing the rear end of the rail...........................................................................................................................19
8 Installing the front end of the rail........................................................................................................................ 20
9 Installing screws.......................................................................................................................................................20
10 Pull out the intermediate rail..................................................................................................................................21
11 Attach the inner rails to the system.................................................................................................................... 21
12 Install system into the extended rails..................................................................................................................22
13 Slide system into the rack..................................................................................................................................... 22
14 Installing the front bezel........................................................................................................................................ 23
15 Remove the inner rails............................................................................................................................................ 26
16 Push the middle rails back..................................................................................................................................... 26
17 Install the inner rail onto the chassis...................................................................................................................27
18 Attach rail to the back post of the rack.............................................................................................................28
19 Attach rail to the front post of the rack............................................................................................................ 28
20 Install the enclosure into the extended rails......................................................................................................29
21 Install the CMA attachment brackets on the left rails................................................................................... 30
22 Install the CMA attachment brackets on the right rails................................................................................. 30
23 Install the upper CMA..............................................................................................................................................31
24 Install the lower CMA (upper CMA not shown)...............................................................................................32
25 Install the bezel........................................................................................................................................................ 32
26 Blue tab on rail must be pushed in.......................................................................................................................34
27 Installing and securing the rails—front.............................................................................................................. 34
28 Installing and securing the rails—rear................................................................................................................ 35
29 Installing tray.............................................................................................................................................................35
30 Spring clips—push up to release tray.................................................................................................................36
31 Opening the cable chain lids................................................................................................................................. 36
32 Cable positioning in cable chains......................................................................................................................... 36
33 1-Inch graduation label............................................................................................................................................37
34 Attaching cable chains to tray.............................................................................................................................. 37
35 Installing the chassis bracket into the shelf...................................................................................................... 37
36 Installing the chassis bracket................................................................................................................................ 38
37 Installing the bezel...................................................................................................................................................38
38 Connecting the rail to the back post.................................................................................................................. 39
39 Attaching the rail to the front post..................................................................................................................... 39
40 Securing the rails to the rack................................................................................................................................40
Figures
6 Figures