53
Installation and Operation Manual for RPI M50A
8 Settings
53
Installation and Operation Manual for RPI M50A
8. Settings
8.1 Overview
8.2 Current grid settings (inverter information) 54
8.3 Display language 55
8.4 Date and time 56
8.5 Baud rate for RS485 57
8.6 Inverter ID 58
8.7 Insulation mode and insulation resistance 59
8.8 Grid settings 61
8.9 EPO (External Power Off) 67
8.10 AC Connection type 68
8.11 Max. Power (Maximum feed-in power) 69
8.12 Power limitation 70
8.13 Power versus frequency 72
8.14 Constant cos phi 74
8.15 Cos phi (P) 76
8.16 Constant Q 78
8.17 Q (V) - Apparent power versus voltage 80
8.18 FRT (Fault Ride Through) 83
To Next Page
Loading...
