Delta RPI M50A_120 - Baud Rate for RS485

57
Installation and Operation Manual for RPI M50A
8 Settings
57
Installation and Operation Manual for RPI M50A
8.5 Baud rate for RS485
Overview
With this function you can set the baud rate for the RS485 connection.
► If you connect multiple inverters via RS485, set the same baud rate on each inverter.
Accessing the menu
Main menu > General settings > Baud rate
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1. When the default information is displayed, press any button to open the
main menu. Otherwise, repeatedly press the button
ESC
until the main
menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2. Use the buttons and to select General Settings.
To con rm your selection, press the button
ENT
.
Baud rate
Date & Time
Language
3. Use the buttons and to select Baud rate.
To con rm your selection, press the button
ENT
.
38400
19200
9600
4. Use the buttons and to select a baud rate.
To con rm your selection, press the button
ENT
.
Con gurable Parameters
Parameter Description Value range
Baud rate
Sets the baud rate for the RS485
connection.
9600 | 19200 | 38400