Delta RPI M50A_120 - Date and Time

8 Settings
Installation and Operation Manual for RPI M50A
56
Installation and Operation Manual for RPI M50A
56
8.4 Date and time
Overview
With this function you can set date and time.
► For a precise calculation of the statistics in the inverter itself and in a monitoring system, date
and time have to be correct.
Accessing the menu
Main menu > General settings > Date & Time
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1. When the default information is displayed, press any button to open the
main menu. Otherwise, repeatedly press the button
ESC
until the main
menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2. Use the buttons and to select General Settings.
To con rm your selection, press the button
ENT
.
Baud rate
Date & Time
Language
3. Use the buttons and to select Date & time.
To con rm your selection, press the button
ENT
.
10.Sep 2014 14:55
4. Use the buttons and to change the currently marked (under-
lined) value.
When  nished, press the button
ENT
.
→ The marking moves to the next value.
Con gurable Parameters
Parameter Description Value range
-
Date and time –