3. Intended use
Installation and Operation Manual for RPI M50A
8
3. Intended use
The solar inverter may only be used as intended.
Proper use of the solar inverter meets the following
criteria:
● Use in stationary PV systems connected to the
local power grid for converting the direct current in
the PV system to alternating current and feeding it
into the grid
● Use within the specied power range (see
“13 Technical data”, p. 105) and under the
specied ambient conditions (see “5 Planning the
installation”, p. 18).
Any of the following uses of the solar inverter is con-
sidered improper:
● Isolated operation. The solar inverter has anti-
islanding and other monitoring features.
● Use in mobile PV systems.
To Next Page
Loading...
Need help?
General
