Delta RPI M50A_120

75
Installation and Operation Manual for RPI M50A
8 Settings
75
Installation and Operation Manual for RPI M50A
8. To change the parameter value, use the buttons and .
To conrm your setting, press the button
ENT
.
To cancel the action, press the button
ESC
.
Congurable Parameters
Parameter Description Value range
Mode
Switches the function on and off.
ON | OFF
Default value: OFF
Cos phi
Sets up a cos phi so that the inverter can feed reac-
tive power into the grid.
ind 0.8 ... cap 0.8
Do not change this setting without prior
consultation with Delta Solar Support.