Denon AVR-1709 Owner's Manual

ENGLISH
The source selected for lONE2 is also output from the recording
output connectors.
-n,na
Digital audio signals input from the COAXIAL or OPTICAL connectors
cannot
be played in multi-zone.
I Tumi,ng off ther$ound T.mponiriIY;~l-·;I=~,J
Set [SOURCE CONTROL 1] to "AUDIO" and [SOURCE CONTROL 2] to
"lONE2" (main remote control unit).
Press [MUTING]
'* To cancel, either adjust the volume or press [MUTING] again.
The setting is canceled when the zone·'s power is turned off.
Multi-zone Operations
~ Turning the Power On and Off
[Operation on the main unit]
Press <ZONE2 ON/OFF> for the zone to be operated.
[Operation on the remote control unit]
Press [ZONE2 ON] or [ZONE2 OFF]
7-
When using lONE2, it is possible to turn the power for the MAIN
lONE only on or off by pressing [MAIN ON] or [MAIN OFF]
[Operation on the main unit]
Press <ZONE2/ REC SELECT>, then turn <SOURCE SHECT>.
[Operation on the remote control unit]
Set [SOURCE CONTROL 1] to "AUDIO" and [SOURCE CONTROL 2] to
"lONE2" (main remote control unit).
Press [SOURCE SHECn
Set [SOURCE CONTROL 1] to "AUDIO" and [SOURCE CONTROL 2] to
"lONE2" (main remote control unit).
Press [VOLUME]
[Variable range] --- -70dB -1-40dB 1- +18dB
The lONE2 volume can be adjusted only when "lONE2" is selected
at "System Setup" - "Option Setup" - "Amp Assign" (&page 28).
II Adjusting the Volume
ISelecting the Input Source
[Rear]
L€)~' I [ZONE2 OFF]
,:--9_
0
-''''1 I [ZONE2 ON]
: 00:
i 00 6i [SOURCE
-SELECT]
'-r--------.I-I-~
<ZONE2 ON/OFF>
<ZONE2/ REC SELECT>
<SOURCE SELECT>
(5
• ~boIs usedtOlndiClptiutto.ns In this manuai
Button located on both the main unit and the remote control
unit •
BUTTON
Button only on the main unit • <BUTTON>
Button only on the remote control unit • [BUTTON]
:"0":
[VOLUME] ~~i fi\!
[MUTING] I _::~'
[SOURCE
CONTROL2]O·
[SOURCE ....;-::m~':
CONTROL 1] I ";, i:;
(Main remote control unit)
[ZONE2 OFF]
[SOURCE SELECT]
[ZONE2 ON]
[VOLUME]
[MUTING]
(Sub remote control unit)
54

Denon AVR-1709 Specifications

General

Number of Channels	7.1
HDMI Inputs	3
HDMI Outputs	1
HDMI Version	1.3a
Component Video Inputs	2
Component Video Outputs	1
Digital Audio Inputs	2 Optical, 2 Coaxial
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	100 dB
THD	0.08%
Input Impedance	47 kOhm
Input Sensitivity	200 mV
Tuner Presets	56
HDMI Switching	Yes
Tuner Type	AM/FM
Preset Stations	56
Auto Calibration	Yes (Audyssey MultEQ)
Power Consumption	460 W
Standby Power Consumption	0.3 W
Power Output	80 W per channel (8 ohms, 20 Hz - 20 kHz, THD 0.08%)
HDMI Features	Deep Color, x.v.Color
Dolby Formats	Dolby Digital, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby TrueHD
DTS Formats	DTS, DTS-ES, DTS 96/24, DTS Neo:6, DTS-HD Master Audio
Audio Decoders	Dolby Digital, DTS
Amplifier Output Details	80 watts per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Video Inputs/Outputs	Composite
Audio Inputs/Outputs	Digital Optical
Remote Control	Yes
Dimensions	434 x 171 x 377 mm
Weight	21.6 lbs (9.8 kg)