Periodic Maintenance
65
Chapter 3 Maintenance
Replacing the Cleaning Tool
Required Items
Optional item Main unit accessories
Cleaning tool
Milling bur
holder
Mounting screw Hexagonal screwdriver
Procedure
Remove the cleaning tool tube.
To prevent the bristles from being pulled off, grasp the cleaning tool tube gently and pull it down slowly.
Tube
Attach the milling bur holder to the cleaning tool, aligning the milling bur holder with the marked position
on the cleaning tool.
Marked
position
Marked
position
Use the mounting screw to x the milling bur holder in place.
To Next Page
Loading...