DGSHAPE DWX-52D - STEP 3: Loading the Milling Bur

Starting Milling
36
Chapter 2 Milling

Lightly tug on the adapter to check that it does not come loose.

Close the front cover.
STEP 3: Loading the Milling Bur
Required Items
Milling bur
Milling bur
positioner
Milling bur holder
Mounting screw
Hexagonal
screwdriver
Procedure

Attach the milling bur holder to the milling bur positioner.
Orient the milling bur holder as shown in the gure, and then insert and attach the milling bur
holder so that it reaches the back of the hole.
Milling bur holder
Orient this part with the
screw hole facing up.
Milling bur positioner