DGSHAPE DWX-52D - Chapter 4: Troubleshooting and Installation

66
Chapter 4 Troubleshooting
Machine Trouble ............................................................................................................67
Initial Operations Are Not Performed or Fail ..................................................................................... 67
The Operation Button Does Not Respond ......................................................................................... 67
VPanel Does Not Recognize the Machine .......................................................................................... 67
No Data Is Being Output to the Machine, or the Machine Will Not Operate Even
Though Data Is Being Output ................................................................................................................. 68
The Computer Shuts Down When Connecting Multiple Machines .......................................... 68
The Spindle Does Not Rotate .................................................................................................................. 69
The Ionizer Is Ineective (Milling Waste Collects around the Milling Area) ........................... 69
Compressed Air Does Not Come Out ................................................................................................... 69
Automatic Correction Fails ....................................................................................................................... 70
The Milling Bur Management Information Was Lost ...................................................................... 70
The Cleaning Tool Is Not Eective ......................................................................................................... 70
The Adapter Rattles .................................................................................................................................... 70
Milling Quality Problems .................................................................................................71
The Milled Surface Is Not Attractive ..................................................................................................... 71
There Is a Line of Level Dierence in the Milling Results .............................................................. 71
Chipping Occurs (Edges of Milling Products Become Chipped) ................................................ 71
A Hole Opens in the Milling Results ..................................................................................................... 72
The Dimensions of the Milling Results Do Not Match ................................................................... 72
Installation Problems ......................................................................................................73
Installing the Driver Separately .............................................................................................................. 73
Installing the Software and the Electronic-format Manuals Separately .................................. 75
Driver Installation Is Impossible ............................................................................................................. 76
Uninstalling the Driver .............................................................................................................................. 78
Uninstalling VPanel ..................................................................................................................................... 79
Responding to Error Messages ......................................................................................80