Starting Milling
38
Chapter 2 Milling
STEP 4: Loading the Cleaning Tool
If you are not using the cleaning tool, proceed to the next step.
Materials for Which the Cleaning Tool Is Effective
Zirconia, composite resin, and CoCr sintered metal
Required Items
Cleaning tool
Milling bur
holder
Mounting screw Hexagonal screwdriver
Procedure
Remove the cleaning tool tube.
To prevent the bristles from being pulled off, grasp the cleaning tool tube gently and pull it down slowly.
Tube
Attach the milling bur holder to the cleaning tool, aligning the milling bur holder with the marked
position on the cleaning tool.
Marked
position
Marked
position
To Next Page
Loading...