Distech Controls ECLYPSE APEX User Manual

71ECLYPSE APEX
When
Type
is set to
Local
, credentials are added to and managed by this controller.
Figure61: Client Settings - SSO
Item Description
Type Server type.
Server IP Address
Server IP address of the SSO server. This is the IP address of the ECLYPSE controller that was
configured as the server.
Note:
An SSO server must be configured with a static IP address. If the SSO server IP address
changes, you will have to reconfigure all SSO clients with the new IP address. See Ethernet.
Server Https Port Server HTTPS port of the SSO server. By default, this port is set to 443.
Access Token
Server access token of the SSO server. If the server access token changes, this parameter should be
updated by the user accordingly.
In the
Access Token
field, enter the access token belonging to the Server. To do so, go to
Server
Settings
, copy the access token using the copy icon and paste (CTRL+V) into the
Access Token
field in
Client Settings
.
Recovery Password /
Confirm Recovery
Password
Define a recovery password to access the controller in recovery mode if ever the server is unavailable.
See Single Sign On (SSO) Troubleshooting.
Click the show password icon to see the password you are entering.
In order for the recovery to work, we highly recommend you do not forget your recovery
password. If so, a factory reset will be required.
ECLYPSE Web Interface

Distech Controls ECLYPSE APEX Specifications

General

Brand	Distech Controls
Model	ECLYPSE APEX
Category	Control Systems
Language	English