Distech Controls ECLYPSE APEX User Manual

108 ECLYPSE APEX
4. Click the Find Network icon to search for available access points that are within range. The
access points are listed on the right.
Figure86: List of Available Access Points to Pair With
5. Set the encryption mode to be used by this access point in Encryption:
– OPEN: this option should be avoided as it does not provide any wireless security which al-
lows any wireless client to access the LAN.
– WPA2: select the Wi-Fi Protected Access II option to secure the Wi-Fi network with a pass-
word.
– WPA2 Enterprise: Use this option if you are connecting to an enterprise network that has a
working RADIUS authentication server. This RADIUS server provides user authentication.
6. Enter the required Username and Password.
7. Choose the access point’s Extensible Authentication Protocol (EAP) and Phase2 type.
8. Click Apply.
Setting up a Wi-Fi Access Point Wireless Network
This turns the controller into a Wi-Fi access point that other wireless clients can use to have network
access. This access point operates off of the same subnetwork and has the same IP connectivity that
the controller has with its wired network connection. For example, if the controller’s wired connection is
to a network that has an active DHCP server, access point clients can also use this DHCP server to
automatically configure their IP connection parameters. See Wi-Fi Access Point for more information.
Configuring the ECLYPSE Wi-Fi Adapter Wireless Networks

Distech Controls ECLYPSE APEX Specifications

General

Brand	Distech Controls
Model	ECLYPSE APEX
Category	Control Systems
Language	English