Distech Controls ECLYPSE APEX User Manual

70 ECLYPSE APEX
SSO Server Settings
The
Server Settings
tab allows you to select the type of server mode for the Server controller. The
available modes are
Single Sign On
or
Radius Server
.
When
Type
is set to
Single Sign On (SSO)
, the controller will be defined as the SSO Server dedicated
to authentication purposes. Therefore, a single login to the server will authenticate user access to mul-
tiple ECLYPSE controllers that are on the same network.
An SSO server must be configured with a static IP address. If the SSO server IP address changes, you will have to
reconfigure all SSO clients with the new IP address. See Ethernet.
Figure59: SSO Server Settings
Item Description
Server Mode (On/Off)
Enable or disable the functionality of the server. When set to OFF, the controller is no longer in server
mode.
Type Server type.
Access Token
Identifier used by the server that is handling the protected resource to lookup the associated
authorization information.
The access token is usually a long string made up of 16 to 132 random alphanumeric characters and
symbols that would be difficult to guess.
When the SSO service is selected, the access token ID is displayed by default. If required, you can
generate a new code using the generate icon or manually enter an access token.
Click to copy the access token to the clipboard.
Click to refresh the information in the list.
Apply Click
Apply
to apply and save the changes
See also Setting Up the SSO Functionality.
SSO Client Settings
whaThe
Client Settings
tab allows you to select the type of client mode for the Client controller(s).
When
Type
is set to
Single Sign On (SSO)
, the controller will use the SSO server for authentication.
Figure60: Client Settings - Type
ECLYPSE Web Interface

Distech Controls ECLYPSE APEX Specifications

General

Brand	Distech Controls
Model	ECLYPSE APEX
Category	Control Systems
Language	English